PAILING OF PARALLEL WIRE RADIATION CABLE | |||||||||||||
SLWYV SERIES |
|||||||||||||
1.PRODUCT DESCRIPTION | |||||||||||||
Applications:
|
|||||||||||||
Applications in the mine, the subway, the undergroundtunnel, the underground facility and the building interior underthe special environment where the radio wave cannotdirecttransmission or dissemination not in very good , makingcommunications system transmissionline. | ![]() |
||||||||||||
Application Method: | 1.Copper Wire / Copper CladAluminum | ||||||||||||
The Frequency of Use: | Below 1GHZ | 2.Physical Foamed PE Insulation | |||||||||||
Operating Temperature: | -30¡æ~70¡æ | 3.Copper Wire | |||||||||||
Minimumbendingradius: | 100 | 4.Polyester Film Type | |||||||||||
Minmum Installation Temperature: | -15¡æ | 5.Inner Black PE Jacket | |||||||||||
6.Outer Yellow PVC Jacket | |||||||||||||
2.CONSTRUCTION AND PERFORMANCE | |||||||||||||
ITME
|
SLYWV-75-10 |
SLYWV-50-10 |
|||||||||||
The Measurement Of Structure |
InnerConductor |
2.31MM |
3.5MM |
||||||||||
Physicabl Foamed PE Insulation |
10MM |
10MM |
|||||||||||
Railing of Parallel wire Outer Conductor |
11MM |
11MM |
|||||||||||
Inner Black PE Jacket |
13.5MM |
13.5MM |
|||||||||||
Outer Yellow PVC Jacket : -30¡æ |
15.5MM |
15.5MM |
|||||||||||
Performance Parameter |
Weightkg/m |
0.23 |
0.23 |
||||||||||
IMPEDENCE |
75¡À3¦¸ |
50¡À3¦¸ |
|||||||||||
Insulation Dielectric Strength |
NO BREAKDOWN UNDER2.5KV BETWEEN INNERAND OUTER CODUCTORFOR1MIN |
NO BREAKDOWN UNDER2KV BETWEEN INNERAND OUTER CODUCTORFOR1MIN |
|||||||||||
DC Resistance (Ohm) |
¡Ü8.7 |
¡Ü6.2 |
|||||||||||
ATTENUATION |
@ 30MHZ¡Ü1.80dB/100m |
@ 30MHZ¡Ü1.98dB/100m |
|||||||||||
@ 85MHZ¡Ü3.1dB/100m |
@ 85MHZ¡Ü3.62dB/100m |
||||||||||||
@150MHZ¡Ü4.15dB/100m |
@ 150MHZ¡Ü5.16dB/100m |
||||||||||||
Couple Loss |
@ 85MHZ:55¡À5dB |
||||||||||||
@ 150MHZ:65¡À5dB |
|||||||||||||
Resistance of Insulation |
¡Ý1000M¦¸.Km |
||||||||||||
Relative Humidity |
@ 40¡æ98% |
||||||||||||
3.PACKING | |||||||||||||
![]() |
|||||||||||||
Overview: | |||||||||||||
WOODEN DRUMS DIMENSIONS: | |||||||||||||
|
|||||||||||||
A:Flange diameter made of wooden drum. | |||||||||||||
B:Overall width | |||||||||||||
C:Core diameter made of plastic | |||||||||||||
D: Winding width | |||||||||||||